TEST ITEM			UNIT	ASTM TEST	TYPICAL VALUES
INTRODUCTION
Post Consumer Recycling					30%Recycled post-consumer polyethylene(RM0193)
Gauge 厚度					15um		19um		25um		30um
TENSILE
Tensile Strength (MD) 拉伸强度			N/mm²	D882	115		110		90		88
Tensile Strength (TD)					110		105		85		80
Elongation(MD) 断裂伸长率			%		105		110		105		100
Elongation (TD)					100		105		95		90
TEAR 撕裂强度
MD at 400gm			gf	D1922	10.5		13.5		16.5		20.5
TD at 400gm					9.8		12.5		16.5		22.5
SEAL STRENGTH 热封强度
MD\Hot Wire Seal			N/mm	F88	0.85		0.95		1.15		1.35
TD\Hot Wire Seal					1.05		1.15		1.25		1.55
COF (Film To Film)			-
Static 静摩擦				D1894	0.20		0.18		0.22		0.23
Dynamic 动摩擦					0.20		0.18		0.22		0.23
OPTICS
Haze 雾度				D1003	3.5		3.8		4.0		4.3
Clarity 透明度				D1746	93.0		92.0		91.0		90.0
Gloss @ 45Deg 光泽度				D2457	85.0		82.0		80.0		81.0
BARRIER 阻隔性
Oxygen Transmission Rate 透氧率			cc/㎡/day	D3985	9200		8200		5600		4200
Water Vapor Transmission Rate 透水气率			gm/㎡/day	F1249	25.9		17.2		14.5		11.2
SHRINKAGEPROPERTIES 收缩性					MD	TD			MD		TD
Free Shrinkage 收缩率	100℃		%	D2732	17	26			14		23
	110℃				32	44			29		42
	120℃				54	59			53		60
	130℃				68	69			68		69
					MD	MD			TD		TD
Shrink Tension 收缩张力	100℃		Mpa	D2838	1.65	2.35			1.70		2.25
	110℃				2.55	3.20			2.65		3.45
	120℃				2.70	3.45			2.95		3.65
	130℃				2.45	3.10			2.75		3.20

MD\Machine Direction    TD\Transverse Direction

Note:This information represents our best judgment on the work done, but the company assumes no liability whatsoever in connection with the use of information or findings contained herein.

以上资料是本公司内部评测之数据，仅供参考。